Editing cabinet settings - PENN Controls - LIT-12013307 - PC10 - PENN Connected - PENN Connected PC10

PENN Connected PC10 User Guide
Brand
PENN Controls
Product name
PENN Connected PC10
Document type
User Guide
Document number
LIT-12013307
Revision date
2020-05-27
Language
English

Procedure

  1. On the Cabinet Info page, in the upper right of the UI, click the Settings icon.
  2. In the Edit Unit dialog box, on the Unit Info tab, add and edit the following cabinet settings:
    • In the Enter Unit Name field, type a cabinet name.
    • In the Select Unit Make field, click on the drop-down list, and select the make of the cabinet.
    • In the Select Unit Model field, click on the drop-down list, and select the model of the unit.
    • In the Range Upper Value field, enter a value.
    • In the Range Lower Value field, enter a value.
    • View the unit of measurement in the Unit of Measurement list.
    • To enable or disable limit lines, in the Enable/Disable Limit Lines slider, move the slider towards ON or OFF.
  3. Click Save.

What to do next

Note:
  • For information about upper and lower values, see Understanding alarm parameters
  • For information about changing the unit of measurement, see Managing your account.
  • If you enable the limit lines, a dotted line displays on the cabinet data graph to indicate any previously selected lower and upper values.