Kantech - Adding System Components - EntraPass - 8.10 - Software - Administration Guide

EntraPass Special Edition Administration Guide
Product
EntraPass
Document Type
Administration Guide
revised_modified
2019-05-26
Version
8.10
ft:locale
English

About this task

Once the Server has been registered, you may install additional system components. These include EntraPass applications . Before you install system components, make sure that the designated computer meets the minimum requirements.

Note: EntraPass Special Edition supports one Gateway and one Workstation. Additional Gateways and Workstations cannot be added.

Procedure

  1. From the Options toolbar, click on System registration. The System registration window appears.
  2. From the System registration window, select the component you want to install. Then select the Click here to install component button (left-hand pane). The Component Registration (Name of component) window appears.
  3. Enter the Option Serial Number (located on the Option Certificate).
    Note: There are two ways of registered a new component; register online at www.kantech.com or contact your local Kantech technical support to get the registration confirmation code.
  4. Go to www.kantech.com and click on the Member Center.
    Note: If you are not a member yet, submit your request and your membership confirmation should be received by email within 1-2 business days.
  5. Click on Kantech Registration.
  6. Enter the System Serial Number and follow the instructions online.
  7. Return to the EntraPass Component Registration screen and enter the Registration Confirmation Code , then click OK . The OK button is only enabled when both codes are valid.
  8. Repeat stes 2 to 7 for each system component.