Technical Specifications - Verasys - LC-VZC100-0 - LC-VZCPNL-0 - Field Device - VZC100 - VZCPNL

Verasys Zone Coordinator (VZC) Installation Guide

Brand
Verasys
Product name
VZC100
VZCPNL
Document type
Installation Guide
Part number
24-10143-1280
Document revision
C
Revision date
2021-10-14
Language
English
Table 1. Verasys Zone Coordinator
Power requirements Enclosure Model: 120 VAC / 240 VAC Primary 50 Hz / 60 Hz, 24 VAC secondary transformer (+10% / -15%), 400 mA, nominal 12 VA

Board-only model: 24 VAC (15%), Primary 50/60 Hz, 24 VAC Secondary Transformer (±15%), 400 mA, nominal 12 VA, 12 VDC (+50% / -2%)

Addressing Addressing is selectable by the MAC address switch. The MAC address switch is an 8-position DIP, which uses switches 1 through 7 and the addressing range of 1 to 127
Installation environment Protected, dry
Ambient operating conditions -40ºC to 65ºC (-40ºF to 149ºF), 0% to 95% RH, Noncondensing
Ambient storage conditions -40ºC to 85ºC (-40ºF to 185ºF), 0% to 95% RH, Noncondensing
Power Enclosure model: One 3-position terminal block for 120 VAC / 240 VAC supply power

Board-only model: Removable terminal plug for 24 VAC supply power and removable terminal plug for 12 VDC supply power

Communication wiring terminations See Wiring communications.
Shipping weight Enclosure Model: 2 kg (4.5 lb)

Board-Only Model: 227 g (8 oz)

Compliance United States: UL Listed 916/FCC Part 15 Conducted and Radiated
Europe: CE Mark - Johnson Controls declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local office. Johnson Controls. shall not be liable for damage resulting from misapplication or misuse of its products.