- 6 mm (1/4 in.) female spade terminals for input and output wiring and crimping tool or spade-mounted terminal blocks
- A small straight-blade screwdriver for securing wires in the terminal blocks
- An 8 mm (5/16 in.) wrench or 10 mm (3/8 in.) 12-point socket to tighten the square coupler bolt
- Shims or washers to mount the controller, if necessary
- A power screwdriver, 100 mm (4 in.) extension socket, or a punch drill, and 3.5 mm (9/64 in.) drill bits to mount the ZEC
- A pliers to open and close the damper
- 3.97 mm (5/32 in.) ID poly tubing