If you lose your password or if you want to restore the unit to factory defaults, the SBH has the following two reset functions:
- Network Reset
- Reset to Factory Defaults
Use the instructions in the following sections according to the type of reset you require. For both resets, the following information applies:
- The reset button is located on the front of the device, on the lower left, under the LEDs, see the following figure and Figure 1. To reach the reset button, use a small screwdriver or similar tool as shown in the following figure.
- If the SBH is connected to the network when you press the reset button, it disconnects from the network.
- If you press the reset button for more than nine seconds, the reset operation cancels.
- If a fault condition already exists, the reset button does not work.
Figure 1. Reset button
