The Smart Building Hub (SBH300) is the base controller for the Verasys™
Building Automation System (BAS) and provides wired and wireless connection between all
Smart Equipment layers and Verasys controls. Use this guide to complete the following
tasks:
- Connect BACnet® MS/TP devices
- Connect the TMR coordinator
- Power the SBH300
- Log on to the SBH300 local UI
- Configure the Internet connection
|
Wi-Fi AP SSID: VERASYS-SBH Wi-Fi AP Passphrase: Place label here UI Username: admin UI Password: Place label here Device ID: Place label here |
Note: Save this guide. It contains your
default username and password information needed to access this device after a
network reset.