Configuring SAB based zone temperature sensor 199 - Verasys - LIT-12013364 - LC-VAC1000-0 - Smart equipment controller - Verasys Lighting Controller - 4.2

Verasys Sideloop Controller Application Note
Product
Controls > Lighting Controls > Verasys Lighting Controller
Document type
Application Note
Document number
LIT-12013364
Revision date
2021-07-16
Product status
Active

To configure the netsensor 199 for zone temperature monitoring, complete the following steps:

  1. On the SBH, navigate to Details > Netsensor Plug and Play > Netsensor 199.
  2. Set the following parameters:
    1. Description to ZN-T
    2. Trend to Enable
    3. Sample Interval to 900 seconds