Encoding the LED color of JDB8420 and JDB8440 modules - Romutec - LIT-12014235 - JDB8410-1 - Manual and Installation Instructions - Romutec - 4.04

JDB8410-1 Input/Output Module Installation Guide

Brand
Romutec
Product name
Romutec
Document type
Installation Guide
Document number
LIT-12014235
Version
4.04
Revision date
2023-04-26
Product status
Active
Language
English

You can select the color of the LEDs 1, 3, 5 and 7 using the jumpers at the rear of the JDB8420 device, or on top of the JDB8440 device. The position of the jumper determines the color as shown in Figure 1.

  • To select green, move the jumpers to the left.
  • To select red, move the jumpers to the right.
  • To select orange, you need a three-pole jumper that you can order as an accessory. See Table 1 for part numbers and descriptions.
Figure 1. Jumper positions for LED color of JDB8420 and JDB8440