Adjusting the set point - PENN Controls - A19CAC - Electromechanical Temperature Control - A19 Control for Hot Water Immersion

A19CAC Type Automatic Changeover Control Installation Guide

Product
Controls > Hot Water Controls > A19 Control for Hot Water Immersion
Document type
Installation Guide
Document revision
J
Revision date
2023-10-18
docpartnumberlabel
Part No.
Part number
997-361

Use the adjustment screw to adjust the set point between 60°F and 90°F (16°C and 32°C). The A19CAC control is calibrated so that the red to yellow circuit opens on a temperature drop below the control’s set point.