Reusing a TE-6xxx series sensor - Metasys - MS-VMA1826-x - MS-VMA1832-x - Field Device - VMA18 VAV Modular Assembly

VMA1826/1832 VAV Controller Installation Guide

Brand
Metasys
Product name
VMA18 VAV Modular Assembly
Document type
Installation Guide
Part number
24-10143-373
Document revision
K
Revision date
2019-10-18
Language
English
To reuse a TE-6xxx Series Sensor with the VMA controller, complete the instructions in this section. The Y adapter provided in the VMA18 accessory pack is required for this procedure.
CAUTION
The adapter must be installed at the VMA controller location. Damage to the SA Bus may occur if you do not use the Y adapter.

To install the adapter at the VMA controller location, see Installing the adapter at the VMA Controller location.

Figure 1. Y Adapter