N2 - Occupancy Mode Output - Metasys - LIT-12011829 - Field Device - VMA18 VAV Modular Assembly

N2 VMA Application Note
Product
Variable Air Volume > Modular Assemblies > VMA18 VAV Modular Assembly
Document type
Application Note
Document number
LIT-12011829
Revision date
2018-11-01

This module translates the current Effective Occupancy mode into the Occupancy Status as used by the VMA14xx Series Controllers.

This module is typically placed in the Output Control column.

You can view and modify the modules in this group's logic.

Figure 1. N2 - Occupancy Mode Output

Table 1 describes the attributes used by the N2 - Occupancy Mode Output module:

Table 1. N2 - Occupancy Mode Output
Name Type Description Default Value
Occupancy G, V The effective occupancy of the VAV Controller Set Name: Occupancy Mode
Occupancy Mode

The occupancy mode as indicated by the VMA14xx Series Controllers Unoccupied Set Name: Occ Schedule
Note: C - Configuration Mode Only, G - Default Element (Generated State, if applicable), SC - Simulation and Commissioning Modes Only, V - Calculated Value (Outputs)