XL5K Controller Attributes - Metasys - LIT-1201793 - Software Application - Metasys Site Management Portal - 12.0.50

Metasys Site Management Portal Help
Product
Building Automation Systems > Building Automation Systems > Metasys Site Management Portal
Document number
LIT-1201793
Version
12.0.50
Revision date
2023-06-02

This object contains attributes common to many Metasys system objects. These common attributes are described in the Common Object Attributes section. This section includes attributes of the Focus/Configuration tab, the Diagnostics tab (if applicable), and any other tab specific only to this object. See the Object and Feature Tabs section for information on the attributes that appear on the other tabs of this object (for example, the Hardware and Options tab appear on point objects).

Note: In the Notes column, letters indicate the following: C - Configurable, D - Default Attribute for Display, N - Value Not Required, R - Affected by Extension’s Reliability, W - Writable.
Table 1. XL5K Controller Attributes - Focus/Configuration Tab

Attribute Name

Notes

Initial Value

Values/Options/Ranges

 Attribute Description

Enabled

C,W

True

  

If True, allows the controller to be integrated into the Metasys system extended architecture.

Graphic

C,W

    

Indicates the graphic associated with the object.

Graphic Alias

C,W

  

Maximum 256 characters

Indicates a portion of the graphic’s item reference, up to and including the name of the folder containing this object or the controller containing this point.

Offline

      

Indicates the offline/online state of the connected hardware.

Present Value

  

0 (Offline)

Uses Controller Status

Indicates the communication status of the device.
Table 2. XL5K Controller Attributes - Diagnostic Tab

Attribute Name

Initial Value

Values/Options/Ranges

 Attribute Description

Error Percent

    

Indicates the computed error rate for communications to the device using the following equation: (Errors Today + Retries Today) / Number of Packets Today.

Errors Today

    

Indicates the number of transmissions (packets) since midnight that had errors (for example, the data was returned, but the data contained errors).

Packets Today

    

Indicates the number of transmissions (packets) since midnight.

Point Scan Time

    

Indicates the total amount of time to scan for point data from this controller.

Retries Today

    

Indicates the number of transmissions (packets) since midnight where no response data was obtained, causing the transmission to be retried.

Transmits Per Minute

    

Indicates the calculated number of transmissions per minute.