Attributes associated with the hardware source for object data are shown under the Hardware tab of the display panel. These attributes are not exposed to a BACnet network. Attributes marked with the letter C are configurable and attributes marked with the letter W are writeable.
|
Attribute Name |
Notes |
Initial Value |
Values/Options/Range |
Description |
|---|---|---|---|---|
|
Interface Value |
Indicates the current value from the hardware interface. The Interface Value updates when the hardware is read or when the hardware’s current value changes. |
|||
|
NCM Name |
None |
8 characters maximum |
Contains the name of the NCM where the integrated N1 object resides, as defined in the N1 network. Read from the NCM. |
|
|
Network Name |
None |
8 characters maximum |
Contains the network name of the NCM where the integrated object resides as defined in the N1 network. The network name is obtained at startup through the N1 Migration Object. |
|
|
Offline |
False |
Indicates whether the object is online or offline as determined by the communication status to the NCM. |
||
|
Overridden |
False |
Indicates if the point is overridden in the NCM. |
||
|
Reference |
None |
<system>.<object> |
Contains the name of the hardware object in the format of system.object, that the N1 object is associated within the NCM. |
|
|
Remote Object Name |
C,W |
None |
<system>.<object> 8 characters each maximum |
Contains the name of the object in the format of system.object. |