Creating a Blank Project (JCI-PLCSWAS-1) - Metasys - Programmable Logic Controllers

Johnson Controls Automation Studio Installation Guide

Brand
Metasys
Product name
Programmable Logic Controllers
Document type
Installation Guide
Part number
Part No. 24-11416-00289
Document revision
Revision date
2020-12-01
Language
English

Procedure

  1. Launch Automation Studio.
  2. On the Start Page, or under File -> New Project, select New Project.
  3. Provide a Name for the project and a directory to save to.
    • Determine if you need Automation Runtime files. Check the box appropriately.
  4. Click Next.
  5. Name your hardware configuration and how it is defined.
  6. Select the primary Johnson Controls CPU module that you are using for this project.

    The CP048x modules require an additional step to select the matching Bus Module (BB52).

  7. To generate the starting project, click Finish.