Setting the Idle Timeout Value - Metasys - LIT-12011270 - MS-DIS1710-0 - Field Device - DIS1710 Local Controller Display - 6

DIS1710 Local Controller Display Technical Bulletin
Product
Controls > Control Displays > DIS1710 Local Controller Display
Document type
Technical Bulletin
Document number
LIT-12011270
Version
6
Revision date
2019-09-30

About this task

To set the auto-logoff timeout value:

Procedure

  1. Go to the Main Menu.
  2. Scroll down and select the Display Information option.
  3. Scroll down and select the Idle Page Timeout parameter.
  4. On the Modify page, use the Up/Down Arrow keys to select a new idle timeout.
    Figure 1. Modify Idle Page Timeout Page

  5. Press Enter to highlight Accept. Press Enter again to save the setting.