Inserting an SD card into the Cisco IE 4010 switch - Metasys - LIT-12013055 - Gateway/Router - Cisco Switch - 12.0

Cisco IE 2000 and IE 4010 Ethernet Switches for Metasys Networks Installation Instructions and Troubleshooting Guide
Product
Network and Communications > Cisco Switches > Cisco Switch
Document type
Troubleshooting Guide
Document number
LIT-12013055
Version
12.0
Revision date
2022-07-08

Procedure

  1. Locate the SD card slot.
  2. Loosen the captive screw at the top of the cover and pull the cover back to expose the SD card slot.
  3. Insert an SD card that contains the config.text (case sensitive) configuration file and the desired version of IOS operating system. The IOS operating system is a .bin file.
  4. Close the cover and tighten the screw.

Results

Note: For information on compatible SD cards, refer to the Ring Manager IP Network System Catalog Page (LIT-1901096) .