The following figure shows the rear of the Cisco IE 2000 Switch, and label 1 indicates the location of the DIN rail mounting clips.
Figure 1. Cisco IE 2000 switch DIN rail mount application
The following figure shows how to remove the Cisco IE 2000 Switch from the DIN rail mount application. To release the DIN rail, use a large slotted screw driver to push down the spring-loaded latch indicated by label 1.
Figure 2. Cisco IE 2000 switch DIN rail removal
The following figure shows the rear of the AC power module, and the location of the DIN rail mounting clips.
Figure 3. Cisco PWR-IE50W-AC-IEC DIN rail clip locations
