Removing a WRZ-PTR0000-0 Series Temperature Sensor Probe assembly - Johnson Controls - WRZ-PTR0000-0 - Wireless Device - WRZ-PTRxxxx-0 Series Temperature Sensor Probe

WRZ-PTR0000-0 Series Temperature Sensor Probe Assemblies Installation Guide

Product
Sensors and Meters > Room Sensor > WRZ-PTRxxxx-0 Series Temperature Sensor Probe
Document type
Installation Guide
Document revision
H
Revision date
23/02/2023
Part number
24-10332-29

Procedure

To remove or relocate a temperature sensor probe mounted with double-sided adhesive foam tape, complete the following steps:

  1. Carefully twist the probe mounting strap off of the surface.
  2. Remove the adhesive foam tape from the probe mounting strap and clean the mounting strap to remove any leftover adhesive.
    Note: To remount the temperature sensor probe on the surface requires new double-sided adhesive foam tape. Use Can-Do National Tape (Code No. 99116) adhesive foam tape or its equivalent.