Removing a WRZ-PTR0000-0 Series Temperature Sensor Probe assembly installed with double-sided adhesive foam tape - Johnson Controls - WRZ-PTR0000-0 - Wireless Device - WRZ-PTR0000-0 Series Temperature Sensor Probe Assemblies

WRZ-PTR0000-0 Series Temperature Sensor Probe Assemblies Installation Guide

Brand
Johnson Controls
Product name
WRZ-PTR0000-0 Series Temperature Sensor Probe Assemblies
Document type
Installation Guide
Part number
24-10332-29
Document revision
G
Revision date
2020-07-09
Language
English

About this task

To remove or relocate a temperature sensor probe mounted with double-sided adhesive foam tape, complete the following steps:

  1. Carefully twist the probe mounting strap off of the surface.
  2. Remove the adhesive foam tape from the probe mounting strap and clean the mounting strap to remove any leftover adhesive.
    Note: New double-sided adhesive foam tape is required to remount the temperature sensor probe on the surface; use Can-Do National Tape (Code No. 99116) adhesive foam tape or its equivalent.