-
Zone Damper: The sequencer is in this state when the Zone Temperature is less than the Heating Setpoint and Heating is saturated High.
-
Heating: The sequencer is in this state when the Zone Temperature is less than the Heating Setpoint.
-
Satisfied: The sequencer is in this state when Heating, Cooling, or Low Limit Protection are not needed.
-
Cooling: The sequencer is in this state when the Zone Temperature is greater than the Cooling Setpoint.
-
DALL Heating: The sequencer is in this state when the Discharge Air Temperature is less than the Low Limit Setpoint and heating is not saturated High.
-
DALL Damper: The sequencer is in this state when the Discharge Air Temperature is less than the Low Limit Setpoint and heating is saturated High.
-
Zone Temperature Unreliable: The sequencer is in this state when the Zone Temperature is unreliable.