Attributes (N2 Common Outputs - SD VAV ASC) - Johnson Controls - Metasys - LIT-12011147 - Software Application - Controller Configuration Tool - 16.0

Controller Tool Help
Product name
Controller Configuration Tool
Document type
User Guide
Document number
LIT-12011147
Version
16.0
Revision date
2023-10-02

The following table describes the attributes used by this module.

Table 1. N2 Common Outputs - SD VAV ASC Attributes
Name Type 1 Description Default Value
Cooling Control Status   This input is the current control status of the Flow Setpoint reset module.
  • 0=Normal
  • 1=Low
  • 2=Timing Low
  • 3=High
  • 4=Timing High
  • 5=Disabled
  • 6=Overridden
Normal
Heating Control Status   This input is the current control status of the last heating module to operate.
  • 0=Normal
  • 1=Low
  • 2=Timing Low
  • 3=High
  • 4=Timing High
  • 5=Disabled
  • 6=Overridden
Normal
Damper Control Status   This input is the current control status of the flow control module.
  • 0=Normal
  • 1=Low
  • 2=Timing Low
  • 3=High
  • 4=Timing High
  • 5=Disabled
  • 6=Overridden
Normal
Autocalibration Status   This input is the current Autocalibration status of the controller.
  • 0=Uncalibrated
  • 1=Waiting to Calibrate
  • 2=Waiting for Damper
  • 3=Autocalibrate
  • 4=Normal
Uncalibrated
Exhaust Box Control Status   This input is the current control status of the exhaust flow control module.
  • 0=Normal
  • 1=Low
  • 2=Timing Low
  • 3=High
  • 4=Timing High
  • 5=Disabled
  • 6=Overridden
Normal
WarmupCooldown   This input is the current Warmup status of the controller.
  • 0=Normal
  • 1=Warmup Satisfied
  • 2=Warmup Unreliable
  • 3=Cooldown
  • 4=Cooldown Unreliable
  • 5=Prmy Htg
  • 6=Prmy Htg + Supp Htg
  • 7=Prmy Htg + Supp Htg + Box Htg
  • 8=Prmy Htg + Box Htg
  • 9=Prmy Htg + Box Htg + Supp Htg
  • 10=Coast
Normal
Inadequate Cooling V This output indicates that the VAV box is providing the maximum cooling it is capable of. False
Inadequate Heating V This output indicates that the VAV box is providing the maximum heat it is capable of. False
Starved Box V This output indicates that the VAV box has the damper fully open and is unable to reach the flow setpoint. False
Starved Exhaust Box V This output indicates that the VAV box has the exhaust damper fully open and is unable to reach the differential flow setpoint. False
Autocal Active V

This output indicates when the VAV box controller is calibrating the velocity pressure input.

 False
Warmup Status V

This output indicates when the VAV box controller is in a warmup mode of operation.

 False
1 C - Configuration Mode Only, G - Default Element (Generated State, if applicable), SC - Simulation and Commissioning Modes Only, V - Calculated Value (Outputs)