Define Sensor Dialog Box (For NetSensor, NetSensorDuct, NetSensorCO2, and NetVSD) - Johnson Controls - Metasys - LIT-12011147 - Software Application - Controller Configuration Tool - 16.0

Controller Tool Help
Product
Controls > Control Tools > Controller Configuration Tool
Document type
User Guide
Document number
LIT-12011147
Version
16.0
Revision date
2023-10-02

See the Defining Hardware section.

The Define Sensor dialog box appears after you select a Network Sensor (NetDuctSensor, NetZoneSensor, or NetCO2Sensor), Network Cooler/Freezer Sensor (NetZoneSensor), Wireless Sensor (NetZoneSensor), or Network VSD (NetVSD) device to add in the SA Bus Device Selection dialog box. Use this dialog box to select the Sensor Type and to add points to the Network Sensor device.

Note: Wireless Sensors and Wireless Refrigerator/Freezer Temperature Transmitter and Probe Assemblies are considered Network Zone Sensor SA Bus devices.
Table 1. Define Sensor Dialog Box (For NetSensor, NetSensorDuct, NetSensorCO2, and NetVSD)

Field

Description

Sensor Type

 Use to select the Network Sensor type from a drop down list.
Inputs and Outputs Displays all the potential point selections for the Sensor Type. Select the point check boxes you want associated with your Network Sensor.
Add Another check box Selecting the check box before clicking Add Sensor allows you to add multiple Network Sensors in a series.

Add Sensor

Applies the changes and closes the dialog box.

Cancel

Closes the dialog box without applying the changes.

Opens the Help system.