The following information is new or revised for CCT Release 15.0:
- Replaced references of NxE to Supervisor throughout as it is renamed in CCT.
- Replaced references of Idle Page Timeout to Idle Timeout as it is renamed.
- Added Release mode 10.6 as a new release mode for CCT 15.0.
- Updated Display Configuration to include note about the display change for Release Mode 10.6.
- Updated Defining Local Controller Display authorization and Display Setup panel to document new Default password option for release mode 10.6 and later.
- Updated Application Functionality to document issue where Romutec Hardware Inputs and IOM BI points are unreliable when you download a FW 8.0 Controller with the Disable Logic option.
- Updated Tool Functionality to include solution for an issue when performing a Supervisor Passthru Transfer or Commission.
- Updated System Selection Updates to include information about system selection updates for various applications. For further information about these updates, refer to Coils (Cooling) (RTU), Staged Cooling (MASD), Coils (Cooling) (OASD), Coils (Cooling - Cold Deck) (MADD), Coils (Cooling - Cold Deck) (OADD), Coils (Cooling - Cold Deck) (MADD-MZ), Chillers (CC) and Waterside Economizer (CC).
- Updated Test Mode to correct error.
- Updated Mixed Air Single Duct Mechanical System Selection, VAV Single Duct Mechanical System Selection, and VAV Dual Duct Applications to include updates to the System selection tree for ASHRAE Guideline 36.
- Added new section Single Zone VAV AHU Applications to document the Single Zone Air Handling Unit application.