The following table describes the attributes used by this module.
|The network input that warmup mode is required.
|Shutdn Box Open Cmd
|The VAV command to shut down and move the box to the fully open position.
|Shutdn Box Close Cmd
|The VAV command to shut down and move the box to the fully closed position.
|When True, forces the VAV Box Controller into Water Flush mode.
|The System mode necessary to achieve the state based on the inputs.
|Indicates that one of the shutdown modes is active.
|Closes the box when Shutdown Closed is required.
|Indicates a Warmup mode is requested.
1 C - Configuration Mode Only, G - Default Element (Generated State, if applicable), SC - Simulation and Commissioning Modes Only, V - Calculated Value (Outputs)