Attributes (N2 Flow Override) - Johnson Controls - Metasys - LIT-12011147 - Software Application - Controller Configuration Tool - 13.1

Controller Tool Help
Product
Controls > Control Tools > Controller Configuration Tool
Document type
User Guide
Document number
LIT-12011147
Version
13.1
Revision date
2019-12-04

The following table describes the attributes used by this module.

Table 1. N2 Flow Override Attributes
Name Type 1 Description Default Value
Flow Override  

The network input that indicates a network override of the flow setpoint is active.

 False
Flow Preset   The network flow setpoint. 0.0
Flow Setpoint   The current flow setpoint. 0.0
Input  

The input for the application developed flow setpoint.

 0.0
1 C - Configuration Mode Only, G - Default Element (Generated State, if applicable), SC - Simulation and Commissioning Modes Only, V - Calculated Value (Outputs)