Modules (Custom/Monitoring Outdoor Air Items) - Johnson Controls - Metasys - LIT-12011147 - Software Application - Controller Configuration Tool - 13.1

Controller Tool Help
Product
Controls > Control Tools > Controller Configuration Tool
Document type
User Guide
Document number
LIT-12011147
Version
13.1
Revision date
2019-12-04

The Outdoor Air Items selections load the following modules in this Control View column:

Inputs

  • DEW-T (Outdoor Air Dewpoint AI): This Input is loaded when the Dew Point Sensor (AI) node is selected.

  • FRZ-S (Freeze Detector BI): This Input is loaded when the Freeze Detector (BI) node is selected.

  • OA-H (Outdoor Air Humidity AI): This Input is loaded when the Humidity Sensor (AI) node is selected.

  • OA-Q (Outdoor Air Species AI): This Input is loaded when the CO2 Sensor (AI) node is selected.

  • OA-T (Outdoor Air Temperature Sensor AI): This Input is loaded when the Temperature Sensor (AI) node is selected.

  • SNO-S (Snow Detector BI): This Input is loaded when the Snow Detector (BI) node is selected.

  • WIND-DIR (Outdoor Air Wind Direction AI): This Input is loaded when the Wind Direction (AI) node is selected.

  • WIND-SPD (Outdoor Air Wind Speed AI): This Input is loaded when the Wind Speed (AI) node is selected.

See the Input Modules section.

Setpoint/Miscellaneous

  • Degrees to Direction: This module converts wind direction (degrees) to compass direction (North, South, and so on), and is loaded when the Wind Direction (AI) node is selected. This module appears in Custom applications, and not in Monitoring applications.