Configuring the CE360 display - Johnson Controls - LIT-12013860 - CE360 Critical Environment Display

CE360 Critical Environment Display Installation Guide

Johnson Controls
Product name
CE360 Critical Environment Display
Document type
Installation Guide
Document number
Revision date

The CE360 display is configured by populating the display object in CCT applications. The Pressure Control (PC) and Volumetric Offset with Pressure Override (VOC) applications (.caf) provide pre-configured display objects compatible with the CE360 display. For more information on the applications and the display object, refer to the CCM Quick Start Guide (LIT-12014059).

The CE360 uses the display object in the applications (.caf) listed in the table below. You should use these files when setting up the CE360. The pre-engineered and tested applications are available for download from the Johnson Controls® Licensing Portal and from Solution Navigator for the FX Community. For information about these applications, refer to the CCM Quick Start Guide (LIT-12014059).

Table 1. Control applications
Product Description
Room pressure control applications (.caf)
  • Room Pressure Control Imperial
  • Room Pressure Control Metric
Volumetric offset control applications (.caf)
  • VOC with Pressure Override Imperial
  • VOC with Pressure Override Metric