Installing the ZFR1831 Wireless Router as a Repeater - Facility Explorer - LIT-12013796 - Wireless Device - WRG1830/ZFR183x Pro Series

WRG1830/ZFR183x Pro Series Wireless Field Bus for Facility Explorer Systems Technical Bulletin

Facility Explorer
Product name
WRG1830/ZFR183x Pro Series
Document type
Technical Bulletin
Document number
Revision date

About this task

To install the ZFR1831 Wireless Router as a Repeater, complete the following steps:


  1. Refer to the ZFR1831 Pro Series Wireless Router Installation Guide (Part No. 24-114610-0004)
    Important: Do not connect the ZFR Pro Router to power before setting the PAN OFFSET switches.
  2. Set the ZFR1831 Router’s PAN OFFSET Switch according to the job drawings.
  3. Connect the ZFR Pro Router acting as a repeater to the 24VAC source. Apply power and ensure signal strength LED comes on.