Installing shorting blocks to add RS-485 biasing - Facility Explorer - Part No. 24-10174-115 - Supervisory Device - FX Supervisory Controller

FX30E/FX60E Supervisory Controllers Installation Instructions
Product
Controls > Supervisory Controls > FX Supervisory Controller
Document type
Installation Guide
Document number
Part No. 24-10174-115
Document revision
E
Revision date
2019-03-22

Procedure

  1. Locate the four jumper pins behind the RS-485 port, with 2-pin shorting blocks installed on one pin each.
  2. To add biasing, remove and replace both shorting blocks back onto the jumper pins.