Mounting the controller on a 35 mm DIN rail - EasyIO - LIT-12014189 - Building Management - EasyIO FW-08V series 8 Point Variable Air Volume Controller - 1.0

FW-08V Quick Start Guide
Product
Document type
Quick Start Guide
Document number
LIT-12014189
Version
1.0
Revision date
2023-08-25
Product status
Active

Procedure

  1. Mount a section of 35 mm (1.38 in.) DIN rail horizontally on the enclosure base plate.
    Figure 1. 35 mm DIN rail
  2. On the back of the controller, extend the mounting clips.
  3. Hang the top mounting clip on the DIN rail and then place the controller on the DIN rail.
    Figure 2. Placing the controller on the DIN rail
  4. To secure the controller to the DIN rail, close the mounting clip.
  5. Optional: For added security, use DIN rail end clips. For more information, see DIN rail end clips in Table 1.