Indicates the baud rate of the Router FC bus (Table 1).
|
Baud Rate |
Description |
|---|---|
|
Auto |
Use baud rate of running network. This value is the recommended setting for everything on the FC bus except the bus supervisor port. See Active Baud Rate. |
|
1200 |
Use 1200 baud only. This value is not recommended and may not be allowed on some devices. |
|
9600 |
Use 9600 baud only. This value is the lowest standard MS/TP baud rate. |
|
19200 |
Use 19200 baud only. This value is not recommended. |
|
38400 |
Use 38400 baud only. This value is the recommended baud rate for bus supervisor ports. |
|
76800 |
Use 76800 baud only. |
Important: At least one online device on the FC bus must have a Baud Rate Selection that is not Auto to establish the baud rate for the other bus devices. Normally, this device is the supervisory device of the FC bus.
Back to Router Attributes.